Package org.hipparchus.geometry.euclidean.twod

Class Line

java.lang.Object
org.hipparchus.geometry.euclidean.twod.Line
All Implemented Interfaces:
Embedding<Euclidean2D,Vector2D,Euclidean1D,Vector1D>, Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
public class Line extends Object implements Hyperplane<Euclidean2D,Vector2D,Line,SubLine>, Embedding<Euclidean2D,Vector2D,Euclidean1D,Vector1D>
This class represents an oriented line in the 2D plane.

An oriented line can be defined either by prolongating a line segment between two points past these points, or by one point and an angular direction (in trigonometric orientation).

Since it is oriented the two half planes at its two sides are unambiguously identified as a left half plane and a right half plane. This can be used to identify the interior and the exterior in a simple way by local properties only when part of a line is used to define part of a polygon boundary.

A line can also be used to completely define a reference frame in the plane. It is sufficient to select one specific point in the line (the orthogonal projection of the original reference frame on the line) and to use the unit vector in the line direction and the orthogonal vector oriented from left half plane to right half plane. We define two coordinates by the process, the abscissa along the line, and the offset across the line. All points of the plane are uniquely identified by these two coordinates. The line is the set of points at zero offset, the left half plane is the set of points with negative offsets and the right half plane is the set of points with positive offsets.

  • Constructor Details

    • Line

      public Line(Vector2D p1, Vector2D p2, double tolerance)
      Build a line from two points.

      The line is oriented from p1 to p2

      Parameters:
      p1 - first point
      p2 - second point
      tolerance - tolerance below which points are considered identical

    • Line

      public Line(Vector2D p, double angle, double tolerance)
      Build a line from a point and an angle.
      Parameters:
      p - point belonging to the line
      angle - angle of the line with respect to abscissa axis
      tolerance - tolerance below which points are considered identical

    • Line

      public Line(Line line)
      Copy constructor.

      The created instance is completely independent of the original instance, it is a deep copy.

      Parameters:
      line - line to copy

  • Method Details

    • copySelf

      public Line copySelf()
      Copy the instance.

      The instance created is completely independent of the original one. A deep copy is used, none of the underlying objects are shared (except for immutable objects).

      Specified by:
      copySelf in interface Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
      Returns:
      a new hyperplane, copy of the instance

    • reset

      public void reset(Vector2D p1, Vector2D p2)
      Reset the instance as if built from two points.

      The line is oriented from p1 to p2

      Parameters:
      p1 - first point
      p2 - second point

    • reset

      public void reset(Vector2D p, double alpha)
      Reset the instance as if built from a line and an angle.
      Parameters:
      p - point belonging to the line
      alpha - angle of the line with respect to abscissa axis

    • revertSelf

      public void revertSelf()
      Revert the instance.

    • getReverse

      public Line getReverse()
      Get the reverse of the instance.

      Get a line with reversed orientation with respect to the instance.

      As long as neither the instance nor its reverse are modified (i.e. as long as none of the reset(Vector2D, Vector2D), reset(Vector2D, double), revertSelf(), setAngle(double) or setOriginOffset(double) methods are called), then the line and its reverse remain linked together so that line.getReverse().getReverse() == line. When one of the line is modified, the link is deleted as both instance becomes independent.

      Returns:
      a new line, with orientation opposite to the instance orientation

    • toSubSpace

      public Vector1D toSubSpace(Vector2D point)
      Transform a space point into a sub-space point.
      Specified by:
      toSubSpace in interface Embedding<Euclidean2D,Vector2D,Euclidean1D,Vector1D>
      Parameters:
      point - n-dimension point of the space
      Returns:
      (n-1)-dimension point of the sub-space corresponding to the specified space point
      See Also:

    • toSpace

      public Vector2D toSpace(Vector1D point)
      Transform a sub-space point into a space point.
      Specified by:
      toSpace in interface Embedding<Euclidean2D,Vector2D,Euclidean1D,Vector1D>
      Parameters:
      point - (n-1)-dimension point of the sub-space
      Returns:
      n-dimension point of the space corresponding to the specified sub-space point
      See Also:

    • intersection

      public Vector2D intersection(Line other)
      Get the intersection point of the instance and another line.
      Parameters:
      other - other line
      Returns:
      intersection point of the instance and the other line or null if there are no intersection points

    • project

      public Vector2D project(Vector2D point)
      Project a point to the hyperplane.
      Specified by:
      project in interface Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
      Parameters:
      point - point to project
      Returns:
      projected point

    • getTolerance

      public double getTolerance()
      Get the tolerance below which points are considered to belong to the hyperplane.
      Specified by:
      getTolerance in interface Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
      Returns:
      tolerance below which points are considered to belong to the hyperplane

    • wholeHyperplane

      public SubLine wholeHyperplane()
      Build a sub-hyperplane covering the whole hyperplane.
      Specified by:
      wholeHyperplane in interface Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
      Returns:
      a sub-hyperplane covering the whole hyperplane

    • emptyHyperplane

      public SubLine emptyHyperplane()
      Build a sub-hyperplane covering nothing.
      Specified by:
      emptyHyperplane in interface Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
      Returns:
      a sub-hyperplane covering nothing

    • wholeSpace

      public PolygonsSet wholeSpace()
      Build a region covering the whole space.
      Specified by:
      wholeSpace in interface Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
      Returns:
      a region containing the instance (really a PolygonsSet instance)

    • getOffset

      public double getOffset(Line line)
      Get the offset (oriented distance) of a parallel line.

      This method should be called only for parallel lines otherwise the result is not meaningful.

      The offset is 0 if both lines are the same, it is positive if the line is on the right side of the instance and negative if it is on the left side, according to its natural orientation.

      Parameters:
      line - line to check
      Returns:
      offset of the line

    • getOffset

      public double getOffset(Vector2D point)
      Get the offset (oriented distance) of a point.

      The offset is 0 if the point is on the underlying hyperplane, it is positive if the point is on one particular side of the hyperplane, and it is negative if the point is on the other side, according to the hyperplane natural orientation.

      Specified by:
      getOffset in interface Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
      Parameters:
      point - point to check
      Returns:
      offset of the point

    • moveToOffset

      public Vector2D moveToOffset(Vector2D point, double offset)
      Move point up to specified offset.

      Motion is orthogonal to the hyperplane

      Specified by:
      moveToOffset in interface Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
      Parameters:
      point - point to move
      offset - desired offset
      Returns:
      moved point at desired offset

    • arbitraryPoint

      public Vector2D arbitraryPoint()
      Get an arbitrary point in the hyperplane.
      Specified by:
      arbitraryPoint in interface Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
      Returns:
      arbirary point in the hyperplane

    • sameOrientationAs

      public boolean sameOrientationAs(Line other)
      Check if the instance has the same orientation as another hyperplane.

      This method is expected to be called on parallel hyperplanes. The method should not re-check for parallelism, only for orientation, typically by testing something like the sign of the dot-products of normals.

      Specified by:
      sameOrientationAs in interface Hyperplane<Euclidean2D,Vector2D,Line,SubLine>
      Parameters:
      other - other hyperplane to check against the instance
      Returns:
      true if the instance and the other hyperplane have the same orientation

    • getPointAt

      public Vector2D getPointAt(Vector1D abscissa, double offset)
      Get one point from the plane.
      Parameters:
      abscissa - desired abscissa for the point
      offset - desired offset for the point
      Returns:
      one point in the plane, with given abscissa and offset relative to the line

    • contains

      public boolean contains(Vector2D p)
      Check if the line contains a point.
      Parameters:
      p - point to check
      Returns:
      true if p belongs to the line

    • distance

      public double distance(Vector2D p)
      Compute the distance between the instance and a point.

      This is a shortcut for invoking FastMath.abs(getOffset(p)), and provides consistency with what is in the org.hipparchus.geometry.euclidean.threed.Line class.

      Parameters:
      p - to check
      Returns:
      distance between the instance and the point

    • isParallelTo

      public boolean isParallelTo(Line line)
      Check the instance is parallel to another line.
      Parameters:
      line - other line to check
      Returns:
      true if the instance is parallel to the other line (they can have either the same or opposite orientations)

    • translateToPoint

      public void translateToPoint(Vector2D p)
      Translate the line to force it passing by a point.
      Parameters:
      p - point by which the line should pass

    • getAngle

      public double getAngle()
      Get the angle of the line.
      Returns:
      the angle of the line with respect to the abscissa axis

    • setAngle

      public void setAngle(double angle)
      Set the angle of the line.
      Parameters:
      angle - new angle of the line with respect to the abscissa axis

    • getOriginOffset

      public double getOriginOffset()
      Get the offset of the origin.
      Returns:
      the offset of the origin

    • setOriginOffset

      public void setOriginOffset(double offset)
      Set the offset of the origin.
      Parameters:
      offset - offset of the origin

    • getTransform

      public static Transform<Euclidean2D,Vector2D,Line,SubLine,Euclidean1D,Vector1D,OrientedPoint,SubOrientedPoint> getTransform(double cXX, double cYX, double cXY, double cYY, double cX1, double cY1) throws MathIllegalArgumentException
      Get a Transform embedding an affine transform.
      Parameters:
      cXX - transform factor between input abscissa and output abscissa
      cYX - transform factor between input abscissa and output ordinate
      cXY - transform factor between input ordinate and output abscissa
      cYY - transform factor between input ordinate and output ordinate
      cX1 - transform addendum for output abscissa
      cY1 - transform addendum for output ordinate
      Returns:
      a new transform that can be applied to either Vector2D, Line or SubHyperplane instances
      Throws:
      MathIllegalArgumentException - if the transform is non invertible