java.lang.Object
- org.hipparchus.geometry.euclidean.threed.Line

All Implemented Interfaces:

Embedding<Euclidean3D,Euclidean1D>
```
public class Line
extends Object
implements Embedding<Euclidean3D,Euclidean1D>
```
The class represent lines in a three dimensional space.
Each oriented line is intrinsically associated with an abscissa which is a coordinate on the line. The point at abscissa 0 is the orthogonal projection of the origin on the line, another equivalent way to express this is to say that it is the point of the line which is closest to the origin. Abscissa increases in the line direction.

See Also:

fromDirection(Vector3D, Vector3D, double), Line(Vector3D, Vector3D, double)

Constructor Summary

Constructors
Constructor Description

Line(Line line)
Copy constructor.

Line(Vector3D p1, Vector3D p2, double tolerance)
Build a line from two points.

Method Summary

All Methods Static Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`Vector3D`	`closestPoint(Line line)`	Compute the point of the instance closest to another line.
`boolean`	`contains(Vector3D p)`	Check if the instance contains a point.
`double`	`distance(Line line)`	Compute the shortest distance between the instance and another line.
`double`	`distance(Vector3D p)`	Compute the distance between the instance and a point.
`static Line`	`fromDirection(Vector3D point, Vector3D direction, double tolerance)`	Create a line from a point and a direction.
`double`	`getAbscissa(Vector3D point)`	Get the abscissa of a point with respect to the line.
`Vector3D`	`getDirection()`	Get the normalized direction vector.
`Vector3D`	`getOrigin()`	Get the line point closest to the origin.
`double`	`getTolerance()`	Get the tolerance below which points are considered identical.
`Vector3D`	`intersection(Line line)`	Get the intersection point of the instance and another line.
`boolean`	`isSimilarTo(Line line)`	Check if the instance is similar to another line.
`Vector3D`	`pointAt(double abscissa)`	Get one point from the line.
`void`	`reset(Vector3D p1, Vector3D p2)`	Reset the instance as if built from two points.
`Line`	`revert()`	Get a line with reversed direction.
`Vector3D`	`toSpace(Point<Euclidean1D> point)`	Transform a sub-space point into a space point.
`Vector3D`	`toSpace(Vector<Euclidean1D,Vector1D> vector)`	Transform a sub-space point into a space point.
`Vector1D`	`toSubSpace(Point<Euclidean3D> point)`	Transform a space point into a sub-space point.
`Vector1D`	`toSubSpace(Vector<Euclidean3D,Vector3D> vector)`	Transform a space point into a sub-space point.
`SubLine`	`wholeLine()`	Build a sub-line covering the whole line.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Constructor Detail
  - Line
```
public Line(Vector3D p1,
            Vector3D p2,
            double tolerance)
     throws MathIllegalArgumentException
```
    Build a line from two points.
    
    Parameters:
    
    p1 - first point belonging to the line (this can be any point)
    
    p2 - second point belonging to the line (this can be any point, different from p1)
    
    tolerance - tolerance below which points are considered identical
    
    Throws:
    
    MathIllegalArgumentException - if the points are equal
    
    See Also:
    
    fromDirection(Vector3D, Vector3D, double)
  - Line
```
public Line(Line line)
```
    Copy constructor.
    The created instance is completely independent from the original instance, it is a deep copy.
    
    Parameters:
    
    line - line to copy
- Method Detail
  - fromDirection
```
public static Line fromDirection(Vector3D point,
                                 Vector3D direction,
                                 double tolerance)
```
    Create a line from a point and a direction. Line = point + t * direction, where t is any real number.
    
    Parameters:
    
    point - on the line. Can be any point.
    
    direction - of the line. Must not be the zero vector.
    
    tolerance - below which points are considered identical.
    
    Returns:
    
    a new Line with the given point and direction.
    
    Throws:
    
    MathIllegalArgumentException - if direction is the zero vector.
    
    See Also:
    
    Line(Vector3D, Vector3D, double)
  - reset
```
public void reset(Vector3D p1,
                  Vector3D p2)
           throws MathIllegalArgumentException
```
    Reset the instance as if built from two points.
    
    Parameters:
    
    p1 - first point belonging to the line (this can be any point)
    
    p2 - second point belonging to the line (this can be any point, different from p1)
    
    Throws:
    
    MathIllegalArgumentException - if the points are equal
  - getTolerance
```
public double getTolerance()
```
    Get the tolerance below which points are considered identical.
    
    Returns:
    
    tolerance below which points are considered identical
  - revert
```
public Line revert()
```
    Get a line with reversed direction.
    
    Returns:
    
    a new instance, with reversed direction
  - getDirection
```
public Vector3D getDirection()
```
    Get the normalized direction vector.
    
    Returns:
    
    normalized direction vector
  - getOrigin
```
public Vector3D getOrigin()
```
    Get the line point closest to the origin.
    
    Returns:
    
    line point closest to the origin
  - getAbscissa
```
public double getAbscissa(Vector3D point)
```
    Get the abscissa of a point with respect to the line.
    The abscissa is 0 if the projection of the point and the projection of the frame origin on the line are the same point.
    
    Parameters:
    
    point - point to check
    
    Returns:
    
    abscissa of the point
  - pointAt
```
public Vector3D pointAt(double abscissa)
```
    Get one point from the line.
    
    Parameters:
    
    abscissa - desired abscissa for the point
    
    Returns:
    
    one point belonging to the line, at specified abscissa
  - toSubSpace
```
public Vector1D toSubSpace(Vector<Euclidean3D,Vector3D> vector)
```
    Transform a space point into a sub-space point.
    
    Parameters:
    
    vector - n-dimension point of the space
    
    Returns:
    
    (n-1)-dimension point of the sub-space corresponding to the specified space point
  - toSpace
```
public Vector3D toSpace(Vector<Euclidean1D,Vector1D> vector)
```
    Transform a sub-space point into a space point.
    
    Parameters:
    
    vector - (n-1)-dimension point of the sub-space
    
    Returns:
    
    n-dimension point of the space corresponding to the specified sub-space point
  - toSubSpace
```
public Vector1D toSubSpace(Point<Euclidean3D> point)
```
    Transform a space point into a sub-space point.
    
    Specified by:
    
    toSubSpace in interface Embedding<Euclidean3D,Euclidean1D>
    
    Parameters:
    
    point - n-dimension point of the space
    
    Returns:
    
    (n-1)-dimension point of the sub-space corresponding to the specified space point
    
    See Also:
    
    getAbscissa(Vector3D)
  - toSpace
```
public Vector3D toSpace(Point<Euclidean1D> point)
```
    Transform a sub-space point into a space point.
    
    Specified by:
    
    toSpace in interface Embedding<Euclidean3D,Euclidean1D>
    
    Parameters:
    
    point - (n-1)-dimension point of the sub-space
    
    Returns:
    
    n-dimension point of the space corresponding to the specified sub-space point
    
    See Also:
    
    pointAt(double)
  - isSimilarTo
```
public boolean isSimilarTo(Line line)
```
    Check if the instance is similar to another line.
    Lines are considered similar if they contain the same points. This does not mean they are equal since they can have opposite directions.
    
    Parameters:
    
    line - line to which instance should be compared
    
    Returns:
    
    true if the lines are similar
  - contains
```
public boolean contains(Vector3D p)
```
    Check if the instance contains a point.
    
    Parameters:
    
    p - point to check
    
    Returns:
    
    true if p belongs to the line
  - distance
```
public double distance(Vector3D p)
```
    Compute the distance between the instance and a point.
    
    Parameters:
    
    p - to check
    
    Returns:
    
    distance between the instance and the point
  - distance
```
public double distance(Line line)
```
    Compute the shortest distance between the instance and another line.
    
    Parameters:
    
    line - line to check against the instance
    
    Returns:
    
    shortest distance between the instance and the line
  - closestPoint
```
public Vector3D closestPoint(Line line)
```
    Compute the point of the instance closest to another line.
    
    Parameters:
    
    line - line to check against the instance
    
    Returns:
    
    point of the instance closest to another line
  - intersection
```
public Vector3D intersection(Line line)
```
    Get the intersection point of the instance and another line.
    
    Parameters:
    
    line - other line
    
    Returns:
    
    intersection point of the instance and the other line or null if there are no intersection points
  - wholeLine
```
public SubLine wholeLine()
```
    Build a sub-line covering the whole line.
    
    Returns:
    
    a sub-line covering the whole line

Constructor	Description
`Line(Line line)`	Copy constructor.
`Line(Vector3D p1, Vector3D p2, double tolerance)`	Build a line from two points.

Class Line

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

Line

Line

Method Detail

fromDirection

reset

getTolerance

revert

getDirection

getOrigin

getAbscissa

pointAt

toSubSpace

toSpace

toSubSpace

toSpace

isSimilarTo

contains

distance

distance

closestPoint

intersection

wholeLine