Dfp (Hipparchus 1.8 API)

java.lang.Object
- org.hipparchus.dfp.Dfp

All Implemented Interfaces:

CalculusFieldElement<Dfp>, FieldElement<Dfp>, RealFieldElement<Dfp>

Direct Known Subclasses:

DfpDec
```
public class Dfp
extends Object
implements RealFieldElement<Dfp>
```
Decimal floating point library for Java
Another floating point class. This one is built using radix 10000 which is 10⁴, so its almost decimal.

The design goals here are:
1. Decimal math, or close to it
2. Settable precision (but no mix between numbers using different settings)
3. Portability. Code should be kept as portable as possible.
4. Performance
5. Accuracy - Results should always be +/- 1 ULP for basic algebraic operation
6. Comply with IEEE 854-1987 as much as possible. (See IEEE 854-1987 notes below)
Trade offs:
1. Memory foot print. I'm using more memory than necessary to represent numbers to get better performance.
2. Digits are bigger, so rounding is a greater loss. So, if you really need 12 decimal digits, better use 4 base 10000 digits there can be one partially filled.
Numbers are represented in the following form:
```
  n  =  sign × mant × (radix)^exp;
  
```
where sign is ±1, mantissa represents a fractional number between zero and one. mant[0] is the least significant digit. exp is in the range of -32767 to 32768

IEEE 854-1987 Notes and differences

IEEE 854 requires the radix to be either 2 or 10. The radix here is 10000, so that requirement is not met, but it is possible that a subclassed can be made to make it behave as a radix 10 number. It is my opinion that if it looks and behaves as a radix 10 number then it is one and that requirement would be met.

The radix of 10000 was chosen because it should be faster to operate on 4 decimal digits at once instead of one at a time. Radix 10 behavior can be realized by adding an additional rounding step to ensure that the number of decimal digits represented is constant.

The IEEE standard specifically leaves out internal data encoding, so it is reasonable to conclude that such a subclass of this radix 10000 system is merely an encoding of a radix 10 system.

IEEE 854 also specifies the existence of "sub-normal" numbers. This class does not contain any such entities. The most significant radix 10000 digit is always non-zero. Instead, we support "gradual underflow" by raising the underflow flag for numbers less with exponent less than expMin, but don't flush to zero until the exponent reaches MIN_EXP-digits. Thus the smallest number we can represent would be: 1E(-(MIN_EXP-digits-1)*4), eg, for digits=5, MIN_EXP=-32767, that would be 1e-131092.

IEEE 854 defines that the implied radix point lies just to the right of the most significant digit and to the left of the remaining digits. This implementation puts the implied radix point to the left of all digits including the most significant one. The most significant digit here is the one just to the right of the radix point. This is a fine detail and is really only a matter of definition. Any side effects of this can be rendered invisible by a subclass.
See Also:

DfpField

Field Summary

Fields
Modifier and Type	Field and Description
`static int`	`ERR_SCALE` The amount under/overflows are scaled by before going to trap handler
`protected int`	`exp` Exponent.
`static byte`	`FINITE` Indicator value for normal finite numbers.
`static byte`	`INFINITE` Indicator value for Infinity.
`protected int[]`	`mant` Mantissa.
`static int`	`MAX_EXP` The maximum exponent before overflow is signaled and results flushed to infinity
`static int`	`MIN_EXP` The minimum exponent before underflow is signaled.
`protected byte`	`nans` Indicator for non-finite / non-number values.
`static byte`	`QNAN` Indicator value for quiet NaN.
`static int`	`RADIX` The radix, or base of this system.
`protected byte`	`sign` Sign bit: 1 for positive, -1 for negative.
`static byte`	`SNAN` Indicator value for signaling NaN.

Fields inherited from interface org.hipparchus.CalculusFieldElement
DEG_TO_RAD, RAD_TO_DEG

Constructor Summary

Constructors
Modifier	Constructor and Description
	`Dfp(Dfp d)` Copy constructor.
`protected`	`Dfp(DfpField field)` Makes an instance with a value of zero.
`protected`	`Dfp(DfpField field, byte x)` Create an instance from a byte value.
`protected`	`Dfp(DfpField field, byte sign, byte nans)` Creates an instance with a non-finite value.
`protected`	`Dfp(DfpField field, double x)` Create an instance from a double value.
`protected`	`Dfp(DfpField field, int x)` Create an instance from an int value.
`protected`	`Dfp(DfpField field, long x)` Create an instance from a long value.
`protected`	`Dfp(DfpField field, String s)` Create an instance from a String representation.

Method Summary

All Methods Static Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`Dfp`	`abs()` Get the absolute value of instance.
`Dfp`	`acos()` Arc cosine operation.
`Dfp`	`acosh()` Inverse hyperbolic cosine operation.
`Dfp`	`add(Dfp x)` Add x to this.
`Dfp`	`add(double a)` '+' operator.
`protected int`	`align(int e)` Make our exp equal to the supplied one, this may cause rounding.
`Dfp`	`asin()` Arc sine operation.
`Dfp`	`asinh()` Inverse hyperbolic sine operation.
`Dfp`	`atan()` Arc tangent operation.
`Dfp`	`atan2(Dfp x)` Two arguments arc tangent operation.
`Dfp`	`atanh()` Inverse hyperbolic tangent operation.
`Dfp`	`cbrt()` Cubic root.
`Dfp`	`ceil()` Round to an integer using the round ceil mode.
`int`	`classify()` Returns the type - one of FINITE, INFINITE, SNAN, QNAN.
`protected int`	`complement(int extra)` Negate the mantissa of this by computing the complement.
`Dfp`	`copySign(Dfp s)` Returns the instance with the sign of the argument.
`static Dfp`	`copysign(Dfp x, Dfp y)` Creates an instance that is the same as x except that it has the sign of y.
`Dfp`	`copySign(double s)` Returns the instance with the sign of the argument.
`Dfp`	`cos()` Cosine operation.
`Dfp`	`cosh()` Hyperbolic cosine operation.
`protected String`	`dfp2sci()` Convert an instance to a string using scientific notation.
`protected String`	`dfp2string()` Convert an instance to a string using normal notation.
`Dfp`	`divide(Dfp divisor)` Divide this by divisor.
`Dfp`	`divide(double a)` '÷' operator.
`Dfp`	`divide(int divisor)` Divide by a single digit less than radix.
`Dfp`	`dotrap(int type, String what, Dfp oper, Dfp result)` Raises a trap.
`boolean`	`equals(Object other)` Check if instance is equal to x.
`Dfp`	`exp()` Exponential.
`Dfp`	`expm1()` Exponential minus 1.
`Dfp`	`floor()` Round to an integer using the round floor mode.
`int`	`getExponent()` Return the exponent of the instance, removing the bias.
`DfpField`	`getField()` Get the `Field` (really a `DfpField`) to which the instance belongs.
`Dfp`	`getOne()` Get the constant 1.
`int`	`getRadixDigits()` Get the number of radix digits of the instance.
`double`	`getReal()` Get the real value of the number.
`Dfp`	`getTwo()` Get the constant 2.
`Dfp`	`getZero()` Get the constant 0.
`boolean`	`greaterThan(Dfp x)` Check if instance is greater than x.
`int`	`hashCode()` Gets a hashCode for the instance.
`Dfp`	`hypot(Dfp y)` Returns the hypotenuse of a triangle with sides `this` and `y` - sqrt(this² +y²) avoiding intermediate overflow or underflow.
`int`	`intLog10()` Get the exponent of the greatest power of 10 that is less than or equal to abs(this).
`int`	`intValue()` Convert this to an integer.
`boolean`	`isInfinite()` Check if the instance is infinite.
`boolean`	`isNaN()` Check if the instance is Not a Number.
`boolean`	`isZero()` Check if instance is equal to zero.
`boolean`	`lessThan(Dfp x)` Check if instance is less than x.
`Dfp`	`linearCombination(Dfp[] a, Dfp[] b)` Compute a linear combination.
`Dfp`	`linearCombination(Dfp a1, Dfp b1, Dfp a2, Dfp b2)` Compute a linear combination.
`Dfp`	`linearCombination(Dfp a1, Dfp b1, Dfp a2, Dfp b2, Dfp a3, Dfp b3)` Compute a linear combination.
`Dfp`	`linearCombination(Dfp a1, Dfp b1, Dfp a2, Dfp b2, Dfp a3, Dfp b3, Dfp a4, Dfp b4)` Compute a linear combination.
`Dfp`	`linearCombination(double[] a, Dfp[] b)` Compute a linear combination.
`Dfp`	`linearCombination(double a1, Dfp b1, double a2, Dfp b2)` Compute a linear combination.
`Dfp`	`linearCombination(double a1, Dfp b1, double a2, Dfp b2, double a3, Dfp b3)` Compute a linear combination.
`Dfp`	`linearCombination(double a1, Dfp b1, double a2, Dfp b2, double a3, Dfp b3, double a4, Dfp b4)` Compute a linear combination.
`Dfp`	`log()` Natural logarithm.
`Dfp`	`log10()` Base 10 logarithm.
`int`	`log10K()` Get the exponent of the greatest power of 10000 that is less than or equal to the absolute value of this.
`Dfp`	`log1p()` Shifted natural logarithm.
`Dfp`	`multiply(Dfp x)` Multiply this by x.
`Dfp`	`multiply(double a)` '×' operator.
`Dfp`	`multiply(int x)` Multiply this by a single digit x.
`Dfp`	`negate()` Returns a number that is this number with the sign bit reversed.
`boolean`	`negativeOrNull()` Check if instance is less than or equal to 0.
`Dfp`	`newInstance()` Create an instance with a value of 0.
`Dfp`	`newInstance(byte x)` Create an instance from a byte value.
`Dfp`	`newInstance(byte sig, byte code)` Creates an instance with a non-finite value.
`Dfp`	`newInstance(Dfp d)` Create an instance by copying an existing one.
`Dfp`	`newInstance(DfpField targetField, DfpField.RoundingMode rmode)` Creates an instance by converting the instance to a different field (i.e.
`Dfp`	`newInstance(double x)` Create an instance corresponding to a constant real value.
`Dfp`	`newInstance(int x)` Create an instance from an int value.
`Dfp`	`newInstance(long x)` Create an instance from a long value.
`Dfp`	`newInstance(String s)` Create an instance from a String representation.
`Dfp`	`nextAfter(Dfp x)` Returns the next number greater than this one in the direction of x.
`boolean`	`positiveOrNull()` Check if instance is greater than or equal to 0.
`Dfp`	`pow(Dfp e)` Power operation.
`Dfp`	`pow(double p)` Power operation.
`Dfp`	`pow(int n)` Integer power operation.
`Dfp`	`power10(int e)` Return the specified power of 10.
`Dfp`	`power10K(int e)` Get the specified power of 10000.
`Dfp`	`reciprocal()` Returns the multiplicative inverse of `this` element.
`Dfp`	`remainder(Dfp d)` Returns the IEEE remainder.
`Dfp`	`remainder(double a)` IEEE remainder operator.
`Dfp`	`rint()` Round to nearest integer using the round-half-even method.
`Dfp`	`rootN(int n)` N^th root.
`protected int`	`round(int n)` Round this given the next digit n using the current rounding mode.
`Dfp`	`scalb(int n)` Multiply the instance by a power of 2.
`protected void`	`shiftLeft()` Shift the mantissa left, and adjust the exponent to compensate.
`protected void`	`shiftRight()` Shift the mantissa right, and adjust the exponent to compensate.
`Dfp`	`signum()` Compute the signum of the instance.
`Dfp`	`sin()` Sine operation.
`Dfp`	`sinh()` Hyperbolic sine operation.
`Dfp`	`sqrt()` Compute the square root.
`boolean`	`strictlyNegative()` Check if instance is strictly less than 0.
`boolean`	`strictlyPositive()` Check if instance is strictly greater than 0.
`Dfp`	`subtract(Dfp x)` Subtract x from this.
`Dfp`	`subtract(double a)` '-' operator.
`Dfp`	`tan()` Tangent operation.
`Dfp`	`tanh()` Hyperbolic tangent operation.
`Dfp`	`toDegrees()` Convert radians to degrees, with error of less than 0.5 ULP
`double`	`toDouble()` Convert the instance into a double.
`Dfp`	`toRadians()` Convert degrees to radians, with error of less than 0.5 ULP
`double[]`	`toSplitDouble()` Convert the instance into a split double.
`String`	`toString()` Get a string representation of the instance.
`protected Dfp`	`trap(int type, String what, Dfp oper, Dfp def, Dfp result)` Trap handler.
`protected Dfp`	`trunc(DfpField.RoundingMode rmode)` Does the integer conversions with the specified rounding.
`boolean`	`unequal(Dfp x)` Check if instance is not equal to x.

Methods inherited from class java.lang.Object
clone, finalize, getClass, notify, notifyAll, wait, wait, wait

Methods inherited from interface org.hipparchus.RealFieldElement
round

Methods inherited from interface org.hipparchus.CalculusFieldElement
sinCos

- Field Detail
  - RADIX
```
public static final int RADIX
```
    The radix, or base of this system. Set to 10000
    
    See Also:
    
    Constant Field Values
  - MIN_EXP
```
public static final int MIN_EXP
```
    The minimum exponent before underflow is signaled. Flush to zero occurs at minExp-DIGITS
    
    See Also:
    
    Constant Field Values
  - MAX_EXP
```
public static final int MAX_EXP
```
    The maximum exponent before overflow is signaled and results flushed to infinity
    
    See Also:
    
    Constant Field Values
  - ERR_SCALE
```
public static final int ERR_SCALE
```
    The amount under/overflows are scaled by before going to trap handler
    
    See Also:
    
    Constant Field Values
  - FINITE
```
public static final byte FINITE
```
    Indicator value for normal finite numbers.
    
    See Also:
    
    Constant Field Values
  - INFINITE
```
public static final byte INFINITE
```
    Indicator value for Infinity.
    
    See Also:
    
    Constant Field Values
  - SNAN
```
public static final byte SNAN
```
    Indicator value for signaling NaN.
    
    See Also:
    
    Constant Field Values
  - QNAN
```
public static final byte QNAN
```
    Indicator value for quiet NaN.
    
    See Also:
    
    Constant Field Values
  - mant
```
protected int[] mant
```
    Mantissa.
  - sign
```
protected byte sign
```
    Sign bit: 1 for positive, -1 for negative.
  - exp
```
protected int exp
```
    Exponent.
  - nans
```
protected byte nans
```
    Indicator for non-finite / non-number values.
- Constructor Detail
  - Dfp
```
protected Dfp(DfpField field)
```
    Makes an instance with a value of zero.
    
    Parameters:
    
    field - field to which this instance belongs
  - Dfp
```
protected Dfp(DfpField field,
              byte x)
```
    Create an instance from a byte value.
    
    Parameters:
    
    field - field to which this instance belongs
    
    x - value to convert to an instance
  - Dfp
```
protected Dfp(DfpField field,
              int x)
```
    Create an instance from an int value.
    
    Parameters:
    
    field - field to which this instance belongs
    
    x - value to convert to an instance
  - Dfp
```
protected Dfp(DfpField field,
              long x)
```
    Create an instance from a long value.
    
    Parameters:
    
    field - field to which this instance belongs
    
    x - value to convert to an instance
  - Dfp
```
protected Dfp(DfpField field,
              double x)
```
    Create an instance from a double value.
    
    Parameters:
    
    field - field to which this instance belongs
    
    x - value to convert to an instance
  - Dfp
```
public Dfp(Dfp d)
```
    Copy constructor.
    
    Parameters:
    
    d - instance to copy
  - Dfp
```
protected Dfp(DfpField field,
              String s)
```
    Create an instance from a String representation.
    
    Parameters:
    
    field - field to which this instance belongs
    
    s - string representation of the instance
  - Dfp
```
protected Dfp(DfpField field,
              byte sign,
              byte nans)
```
    Creates an instance with a non-finite value.
    
    Parameters:
    
    field - field to which this instance belongs
    
    sign - sign of the Dfp to create
    
    nans - code of the value, must be one of INFINITE, SNAN, QNAN
- Method Detail
  - newInstance
```
public Dfp newInstance()
```
    Create an instance with a value of 0. Use this internally in preference to constructors to facilitate subclasses
    
    Returns:
    
    a new instance with a value of 0
  - newInstance
```
public Dfp newInstance(byte x)
```
    Create an instance from a byte value.
    
    Parameters:
    
    x - value to convert to an instance
    
    Returns:
    
    a new instance with value x
  - newInstance
```
public Dfp newInstance(int x)
```
    Create an instance from an int value.
    
    Parameters:
    
    x - value to convert to an instance
    
    Returns:
    
    a new instance with value x
  - newInstance
```
public Dfp newInstance(long x)
```
    Create an instance from a long value.
    
    Parameters:
    
    x - value to convert to an instance
    
    Returns:
    
    a new instance with value x
  - newInstance
```
public Dfp newInstance(double x)
```
    Create an instance corresponding to a constant real value.
    The default implementation creates the instance by adding the value to getField().getZero(). This is not optimal and does not work when called with a negative zero as the sign of zero is lost with the addition. The default implementation should therefore be overridden in concrete classes. The default implementation will be removed at the next major version.
    
    Specified by:
    
    newInstance in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    x - constant real value
    
    Returns:
    
    instance corresponding to a constant real value
  - newInstance
```
public Dfp newInstance(Dfp d)
```
    Create an instance by copying an existing one. Use this internally in preference to constructors to facilitate subclasses.
    
    Parameters:
    
    d - instance to copy
    
    Returns:
    
    a new instance with the same value as d
  - newInstance
```
public Dfp newInstance(String s)
```
    Create an instance from a String representation. Use this internally in preference to constructors to facilitate subclasses.
    
    Parameters:
    
    s - string representation of the instance
    
    Returns:
    
    a new instance parsed from specified string
  - newInstance
```
public Dfp newInstance(byte sig,
                       byte code)
```
    Creates an instance with a non-finite value.
    
    Parameters:
    
    sig - sign of the Dfp to create
    
    code - code of the value, must be one of INFINITE, SNAN, QNAN
    
    Returns:
    
    a new instance with a non-finite value
  - newInstance
```
public Dfp newInstance(DfpField targetField,
                       DfpField.RoundingMode rmode)
```
    Creates an instance by converting the instance to a different field (i.e. different accuracy).
    If the target field as a greater number of digits, the extra least significant digits will be set to zero.
    
    Parameters:
    
    targetField - field to convert the instance to
    
    rmode - rounding mode to use if target field as less digits than the instance, can be null otherwise
    
    Returns:
    
    converted instance (or the instance itself if it already has the required number of digits)
    
    Since:
    
    1.7
    
    See Also:
    
    DfpField.getExtendedField(int, boolean)
  - getField
```
public DfpField getField()
```
    Get the Field (really a DfpField) to which the instance belongs.
    The field is linked to the number of digits and acts as a factory for Dfp instances.
    
    Specified by:
    
    getField in interface FieldElement<Dfp>
    
    Returns:
    
    Field (really a DfpField) to which the instance belongs
  - getRadixDigits
```
public int getRadixDigits()
```
    Get the number of radix digits of the instance.
    
    Returns:
    
    number of radix digits
  - getZero
```
public Dfp getZero()
```
    Get the constant 0.
    
    Returns:
    
    a Dfp with value zero
  - getOne
```
public Dfp getOne()
```
    Get the constant 1.
    
    Returns:
    
    a Dfp with value one
  - getTwo
```
public Dfp getTwo()
```
    Get the constant 2.
    
    Returns:
    
    a Dfp with value two
  - shiftLeft
```
protected void shiftLeft()
```
    Shift the mantissa left, and adjust the exponent to compensate.
  - shiftRight
```
protected void shiftRight()
```
    Shift the mantissa right, and adjust the exponent to compensate.
  - align
```
protected int align(int e)
```
    Make our exp equal to the supplied one, this may cause rounding. Also causes de-normalized numbers. These numbers are generally dangerous because most routines assume normalized numbers. Align doesn't round, so it will return the last digit destroyed by shifting right.
    
    Parameters:
    
    e - desired exponent
    
    Returns:
    
    last digit destroyed by shifting right
  - lessThan
```
public boolean lessThan(Dfp x)
```
    Check if instance is less than x.
    
    Parameters:
    
    x - number to check instance against
    
    Returns:
    
    true if instance is less than x and neither are NaN, false otherwise
  - greaterThan
```
public boolean greaterThan(Dfp x)
```
    Check if instance is greater than x.
    
    Parameters:
    
    x - number to check instance against
    
    Returns:
    
    true if instance is greater than x and neither are NaN, false otherwise
  - negativeOrNull
```
public boolean negativeOrNull()
```
    Check if instance is less than or equal to 0.
    
    Returns:
    
    true if instance is not NaN and less than or equal to 0, false otherwise
  - strictlyNegative
```
public boolean strictlyNegative()
```
    Check if instance is strictly less than 0.
    
    Returns:
    
    true if instance is not NaN and less than or equal to 0, false otherwise
  - positiveOrNull
```
public boolean positiveOrNull()
```
    Check if instance is greater than or equal to 0.
    
    Returns:
    
    true if instance is not NaN and greater than or equal to 0, false otherwise
  - strictlyPositive
```
public boolean strictlyPositive()
```
    Check if instance is strictly greater than 0.
    
    Returns:
    
    true if instance is not NaN and greater than or equal to 0, false otherwise
  - abs
```
public Dfp abs()
```
    Get the absolute value of instance.
    
    Specified by:
    
    abs in interface RealFieldElement<Dfp>
    
    Returns:
    
    absolute value of instance
  - isInfinite
```
public boolean isInfinite()
```
    Check if the instance is infinite.
    
    Specified by:
    
    isInfinite in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    true if the instance is infinite
  - isNaN
```
public boolean isNaN()
```
    Check if the instance is Not a Number.
    
    Specified by:
    
    isNaN in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    true if the instance is Not a Number
  - isZero
```
public boolean isZero()
```
    Check if instance is equal to zero.
    
    Specified by:
    
    isZero in interface FieldElement<Dfp>
    
    Returns:
    
    true if instance is equal to zero
  - equals
```
public boolean equals(Object other)
```
    Check if instance is equal to x.
    
    Overrides:
    
    equals in class Object
    
    Parameters:
    
    other - object to check instance against
    
    Returns:
    
    true if instance is equal to x and neither are NaN, false otherwise
  - hashCode
```
public int hashCode()
```
    Gets a hashCode for the instance.
    
    Overrides:
    
    hashCode in class Object
    
    Returns:
    
    a hash code value for this object
  - unequal
```
public boolean unequal(Dfp x)
```
    Check if instance is not equal to x.
    
    Parameters:
    
    x - number to check instance against
    
    Returns:
    
    true if instance is not equal to x and neither are NaN, false otherwise
  - rint
```
public Dfp rint()
```
    Round to nearest integer using the round-half-even method. That is round to nearest integer unless both are equidistant. In which case round to the even one.
    
    Specified by:
    
    rint in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    rounded value
  - floor
```
public Dfp floor()
```
    Round to an integer using the round floor mode. That is, round toward -Infinity
    
    Specified by:
    
    floor in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    rounded value
  - ceil
```
public Dfp ceil()
```
    Round to an integer using the round ceil mode. That is, round toward +Infinity
    
    Specified by:
    
    ceil in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    rounded value
  - remainder
```
public Dfp remainder(Dfp d)
```
    Returns the IEEE remainder.
    
    Specified by:
    
    remainder in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    d - divisor
    
    Returns:
    
    this less n × d, where n is the integer closest to this/d
  - trunc
```
protected Dfp trunc(DfpField.RoundingMode rmode)
```
    Does the integer conversions with the specified rounding.
    
    Parameters:
    
    rmode - rounding mode to use
    
    Returns:
    
    truncated value
  - intValue
```
public int intValue()
```
    Convert this to an integer. If greater than 2147483647, it returns 2147483647. If less than -2147483648 it returns -2147483648.
    
    Returns:
    
    converted number
  - log10K
```
public int log10K()
```
    Get the exponent of the greatest power of 10000 that is less than or equal to the absolute value of this. I.E. if this is 10⁶ then log10K would return 1.
    
    Returns:
    
    integer base 10000 logarithm
  - power10K
```
public Dfp power10K(int e)
```
    Get the specified power of 10000.
    
    Parameters:
    
    e - desired power
    
    Returns:
    
    10000^e
  - intLog10
```
public int intLog10()
```
    Get the exponent of the greatest power of 10 that is less than or equal to abs(this).
    
    Returns:
    
    integer base 10 logarithm
  - power10
```
public Dfp power10(int e)
```
    Return the specified power of 10.
    
    Parameters:
    
    e - desired power
    
    Returns:
    
    10^e
  - complement
```
protected int complement(int extra)
```
    Negate the mantissa of this by computing the complement. Leaves the sign bit unchanged, used internally by add. Denormalized numbers are handled properly here.
    
    Parameters:
    
    extra - ???
    
    Returns:
    
    ???
  - add
```
public Dfp add(Dfp x)
```
    Add x to this.
    
    Specified by:
    
    add in interface FieldElement<Dfp>
    
    Parameters:
    
    x - number to add
    
    Returns:
    
    sum of this and x
  - negate
```
public Dfp negate()
```
    Returns a number that is this number with the sign bit reversed.
    
    Specified by:
    
    negate in interface FieldElement<Dfp>
    
    Returns:
    
    the opposite of this
  - subtract
```
public Dfp subtract(Dfp x)
```
    Subtract x from this.
    
    Specified by:
    
    subtract in interface FieldElement<Dfp>
    
    Parameters:
    
    x - number to subtract
    
    Returns:
    
    difference of this and a
  - round
```
protected int round(int n)
```
    Round this given the next digit n using the current rounding mode.
    
    Parameters:
    
    n - ???
    
    Returns:
    
    the IEEE flag if an exception occurred
  - multiply
```
public Dfp multiply(Dfp x)
```
    Multiply this by x.
    
    Specified by:
    
    multiply in interface FieldElement<Dfp>
    
    Parameters:
    
    x - multiplicand
    
    Returns:
    
    product of this and x
  - multiply
```
public Dfp multiply(int x)
```
    Multiply this by a single digit x.
    
    Specified by:
    
    multiply in interface FieldElement<Dfp>
    
    Parameters:
    
    x - multiplicand
    
    Returns:
    
    product of this and x
  - divide
```
public Dfp divide(Dfp divisor)
```
    Divide this by divisor.
    
    Specified by:
    
    divide in interface FieldElement<Dfp>
    
    Parameters:
    
    divisor - divisor
    
    Returns:
    
    quotient of this by divisor
  - divide
```
public Dfp divide(int divisor)
```
    Divide by a single digit less than radix. Special case, so there are speed advantages. 0 <= divisor < radix
    
    Parameters:
    
    divisor - divisor
    
    Returns:
    
    quotient of this by divisor
  - reciprocal
```
public Dfp reciprocal()
```
    Returns the multiplicative inverse of this element.
    
    Specified by:
    
    reciprocal in interface CalculusFieldElement<Dfp>
    
    Specified by:
    
    reciprocal in interface FieldElement<Dfp>
    
    Returns:
    
    the inverse of this.
  - sqrt
```
public Dfp sqrt()
```
    Compute the square root.
    
    Specified by:
    
    sqrt in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    square root of the instance
  - toString
```
public String toString()
```
    Get a string representation of the instance.
    
    Overrides:
    
    toString in class Object
    
    Returns:
    
    string representation of the instance
  - dfp2sci
```
protected String dfp2sci()
```
    Convert an instance to a string using scientific notation.
    
    Returns:
    
    string representation of the instance in scientific notation
  - dfp2string
```
protected String dfp2string()
```
    Convert an instance to a string using normal notation.
    
    Returns:
    
    string representation of the instance in normal notation
  - dotrap
```
public Dfp dotrap(int type,
                  String what,
                  Dfp oper,
                  Dfp result)
```
    Raises a trap. This does not set the corresponding flag however.
    
    Parameters:
    
    type - the trap type
    
    what - - name of routine trap occurred in
    
    oper - - input operator to function
    
    result - - the result computed prior to the trap
    
    Returns:
    
    The suggested return value from the trap handler
  - trap
```
protected Dfp trap(int type,
                   String what,
                   Dfp oper,
                   Dfp def,
                   Dfp result)
```
    Trap handler. Subclasses may override this to provide trap functionality per IEEE 854-1987.
    
    Parameters:
    
    type - The exception type - e.g. FLAG_OVERFLOW
    
    what - The name of the routine we were in e.g. divide()
    
    oper - An operand to this function if any
    
    def - The default return value if trap not enabled
    
    result - The result that is specified to be delivered per IEEE 854, if any
    
    Returns:
    
    the value that should be return by the operation triggering the trap
  - classify
```
public int classify()
```
    Returns the type - one of FINITE, INFINITE, SNAN, QNAN.
    
    Returns:
    
    type of the number
  - copysign
```
public static Dfp copysign(Dfp x,
                           Dfp y)
```
    Creates an instance that is the same as x except that it has the sign of y. abs(x) = dfp.copysign(x, dfp.one)
    
    Parameters:
    
    x - number to get the value from
    
    y - number to get the sign from
    
    Returns:
    
    a number with the value of x and the sign of y
  - nextAfter
```
public Dfp nextAfter(Dfp x)
```
    Returns the next number greater than this one in the direction of x. If this==x then simply returns this.
    
    Parameters:
    
    x - direction where to look at
    
    Returns:
    
    closest number next to instance in the direction of x
  - toDouble
```
public double toDouble()
```
    Convert the instance into a double.
    
    Returns:
    
    a double approximating the instance
    
    See Also:
    
    toSplitDouble()
  - toSplitDouble
```
public double[] toSplitDouble()
```
    Convert the instance into a split double.
    
    Returns:
    
    an array of two doubles which sum represent the instance
    
    See Also:
    
    toDouble()
  - getReal
```
public double getReal()
```
    Get the real value of the number.
    
    Specified by:
    
    getReal in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    real value
  - add
```
public Dfp add(double a)
```
    '+' operator.
    
    Specified by:
    
    add in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a - right hand side parameter of the operator
    
    Returns:
    
    this+a
  - subtract
```
public Dfp subtract(double a)
```
    '-' operator.
    
    Specified by:
    
    subtract in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a - right hand side parameter of the operator
    
    Returns:
    
    this-a
  - multiply
```
public Dfp multiply(double a)
```
    '×' operator.
    
    Specified by:
    
    multiply in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a - right hand side parameter of the operator
    
    Returns:
    
    this×a
  - divide
```
public Dfp divide(double a)
```
    '÷' operator.
    
    Specified by:
    
    divide in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a - right hand side parameter of the operator
    
    Returns:
    
    this÷a
  - remainder
```
public Dfp remainder(double a)
```
    IEEE remainder operator.
    
    Specified by:
    
    remainder in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a - right hand side parameter of the operator
    
    Returns:
    
    this - n × a where n is the closest integer to this/a
  - signum
```
public Dfp signum()
```
    Compute the signum of the instance. The signum is -1 for negative numbers, +1 for positive numbers and 0 otherwise
    
    Specified by:
    
    signum in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    -1.0, -0.0, +0.0, +1.0 or NaN depending on sign of a
  - copySign
```
public Dfp copySign(Dfp s)
```
    Returns the instance with the sign of the argument. A NaN sign argument is treated as positive.
    
    Specified by:
    
    copySign in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    s - the sign for the returned value
    
    Returns:
    
    the instance with the same sign as the sign argument
  - copySign
```
public Dfp copySign(double s)
```
    Returns the instance with the sign of the argument. A NaN sign argument is treated as positive.
    
    Specified by:
    
    copySign in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    s - the sign for the returned value
    
    Returns:
    
    the instance with the same sign as the sign argument
  - getExponent
```
public int getExponent()
```
    Return the exponent of the instance, removing the bias.
    For double numbers of the form 2^x, the unbiased exponent is exactly x.
    
    Specified by:
    
    getExponent in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    exponent for the instance, without bias
  - scalb
```
public Dfp scalb(int n)
```
    Multiply the instance by a power of 2.
    
    Specified by:
    
    scalb in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    n - power of 2
    
    Returns:
    
    this × 2ⁿ
  - hypot
```
public Dfp hypot(Dfp y)
```
    Returns the hypotenuse of a triangle with sides this and y - sqrt(this² +y²) avoiding intermediate overflow or underflow.
    - If either argument is infinite, then the result is positive infinity.
    - else, if either argument is NaN then the result is NaN.
    Specified by:
    
    hypot in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    y - a value
    
    Returns:
    
    sqrt(this² +y²)
  - cbrt
```
public Dfp cbrt()
```
    Cubic root.
    
    Specified by:
    
    cbrt in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    cubic root of the instance
  - rootN
```
public Dfp rootN(int n)
```
    N^th root.
    
    Specified by:
    
    rootN in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    n - order of the root
    
    Returns:
    
    n^th root of the instance
  - pow
```
public Dfp pow(double p)
```
    Power operation.
    
    Specified by:
    
    pow in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    p - power to apply
    
    Returns:
    
    this^p
  - pow
```
public Dfp pow(int n)
```
    Integer power operation.
    
    Specified by:
    
    pow in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    n - power to apply
    
    Returns:
    
    thisⁿ
  - pow
```
public Dfp pow(Dfp e)
```
    Power operation.
    
    Specified by:
    
    pow in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    e - exponent
    
    Returns:
    
    this^e
  - exp
```
public Dfp exp()
```
    Exponential.
    
    Specified by:
    
    exp in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    exponential of the instance
  - expm1
```
public Dfp expm1()
```
    Exponential minus 1.
    
    Specified by:
    
    expm1 in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    exponential minus one of the instance
  - log
```
public Dfp log()
```
    Natural logarithm.
    
    Specified by:
    
    log in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    logarithm of the instance
  - log1p
```
public Dfp log1p()
```
    Shifted natural logarithm.
    
    Specified by:
    
    log1p in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    logarithm of one plus the instance
  - log10
```
public Dfp log10()
```
    Base 10 logarithm.
    
    Specified by:
    
    log10 in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    base 10 logarithm of the instance
  - cos
```
public Dfp cos()
```
    Cosine operation.
    
    Specified by:
    
    cos in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    cos(this)
  - sin
```
public Dfp sin()
```
    Sine operation.
    
    Specified by:
    
    sin in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    sin(this)
  - tan
```
public Dfp tan()
```
    Tangent operation.
    
    Specified by:
    
    tan in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    tan(this)
  - acos
```
public Dfp acos()
```
    Arc cosine operation.
    
    Specified by:
    
    acos in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    acos(this)
  - asin
```
public Dfp asin()
```
    Arc sine operation.
    
    Specified by:
    
    asin in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    asin(this)
  - atan
```
public Dfp atan()
```
    Arc tangent operation.
    
    Specified by:
    
    atan in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    atan(this)
  - atan2
```
public Dfp atan2(Dfp x)
          throws MathIllegalArgumentException
```
    Two arguments arc tangent operation.
    
    Specified by:
    
    atan2 in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    x - second argument of the arc tangent
    
    Returns:
    
    atan2(this, x)
    
    Throws:
    
    MathIllegalArgumentException - if number of free parameters or orders are inconsistent
  - cosh
```
public Dfp cosh()
```
    Hyperbolic cosine operation.
    
    Specified by:
    
    cosh in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    cosh(this)
  - sinh
```
public Dfp sinh()
```
    Hyperbolic sine operation.
    
    Specified by:
    
    sinh in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    sinh(this)
  - tanh
```
public Dfp tanh()
```
    Hyperbolic tangent operation.
    
    Specified by:
    
    tanh in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    tanh(this)
  - acosh
```
public Dfp acosh()
```
    Inverse hyperbolic cosine operation.
    
    Specified by:
    
    acosh in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    acosh(this)
  - asinh
```
public Dfp asinh()
```
    Inverse hyperbolic sine operation.
    
    Specified by:
    
    asinh in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    asin(this)
  - atanh
```
public Dfp atanh()
```
    Inverse hyperbolic tangent operation.
    
    Specified by:
    
    atanh in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    atanh(this)
  - toDegrees
```
public Dfp toDegrees()
```
    Convert radians to degrees, with error of less than 0.5 ULP
    
    Specified by:
    
    toDegrees in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    instance converted into degrees
  - toRadians
```
public Dfp toRadians()
```
    Convert degrees to radians, with error of less than 0.5 ULP
    
    Specified by:
    
    toRadians in interface CalculusFieldElement<Dfp>
    
    Returns:
    
    instance converted into radians
  - linearCombination
```
public Dfp linearCombination(Dfp[] a,
                             Dfp[] b)
                      throws MathIllegalArgumentException
```
    Compute a linear combination.
    
    Specified by:
    
    linearCombination in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a - Factors.
    
    b - Factors.
    
    Returns:
    
    Σ_i a_i b_i.
    
    Throws:
    
    MathIllegalArgumentException - if arrays dimensions don't match
  - linearCombination
```
public Dfp linearCombination(double[] a,
                             Dfp[] b)
                      throws MathIllegalArgumentException
```
    Compute a linear combination.
    
    Specified by:
    
    linearCombination in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a - Factors.
    
    b - Factors.
    
    Returns:
    
    Σ_i a_i b_i.
    
    Throws:
    
    MathIllegalArgumentException - if arrays dimensions don't match
  - linearCombination
```
public Dfp linearCombination(Dfp a1,
                             Dfp b1,
                             Dfp a2,
                             Dfp b2)
```
    Compute a linear combination.
    
    Specified by:
    
    linearCombination in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a1 - first factor of the first term
    
    b1 - second factor of the first term
    
    a2 - first factor of the second term
    
    b2 - second factor of the second term
    
    Returns:
    
    a₁×b₁ + a₂×b₂
    
    See Also:
    
    CalculusFieldElement.linearCombination(Object, Object, Object, Object, Object, Object), CalculusFieldElement.linearCombination(Object, Object, Object, Object, Object, Object, Object, Object)
  - linearCombination
```
public Dfp linearCombination(double a1,
                             Dfp b1,
                             double a2,
                             Dfp b2)
```
    Compute a linear combination.
    
    Specified by:
    
    linearCombination in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a1 - first factor of the first term
    
    b1 - second factor of the first term
    
    a2 - first factor of the second term
    
    b2 - second factor of the second term
    
    Returns:
    
    a₁×b₁ + a₂×b₂
    
    See Also:
    
    CalculusFieldElement.linearCombination(double, Object, double, Object, double, Object), CalculusFieldElement.linearCombination(double, Object, double, Object, double, Object, double, Object)
  - linearCombination
```
public Dfp linearCombination(Dfp a1,
                             Dfp b1,
                             Dfp a2,
                             Dfp b2,
                             Dfp a3,
                             Dfp b3)
```
    Compute a linear combination.
    
    Specified by:
    
    linearCombination in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a1 - first factor of the first term
    
    b1 - second factor of the first term
    
    a2 - first factor of the second term
    
    b2 - second factor of the second term
    
    a3 - first factor of the third term
    
    b3 - second factor of the third term
    
    Returns:
    
    a₁×b₁ + a₂×b₂ + a₃×b₃
    
    See Also:
    
    CalculusFieldElement.linearCombination(Object, Object, Object, Object), CalculusFieldElement.linearCombination(Object, Object, Object, Object, Object, Object, Object, Object)
  - linearCombination
```
public Dfp linearCombination(double a1,
                             Dfp b1,
                             double a2,
                             Dfp b2,
                             double a3,
                             Dfp b3)
```
    Compute a linear combination.
    
    Specified by:
    
    linearCombination in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a1 - first factor of the first term
    
    b1 - second factor of the first term
    
    a2 - first factor of the second term
    
    b2 - second factor of the second term
    
    a3 - first factor of the third term
    
    b3 - second factor of the third term
    
    Returns:
    
    a₁×b₁ + a₂×b₂ + a₃×b₃
    
    See Also:
    
    CalculusFieldElement.linearCombination(double, Object, double, Object), CalculusFieldElement.linearCombination(double, Object, double, Object, double, Object, double, Object)
  - linearCombination
```
public Dfp linearCombination(Dfp a1,
                             Dfp b1,
                             Dfp a2,
                             Dfp b2,
                             Dfp a3,
                             Dfp b3,
                             Dfp a4,
                             Dfp b4)
```
    Compute a linear combination.
    
    Specified by:
    
    linearCombination in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a1 - first factor of the first term
    
    b1 - second factor of the first term
    
    a2 - first factor of the second term
    
    b2 - second factor of the second term
    
    a3 - first factor of the third term
    
    b3 - second factor of the third term
    
    a4 - first factor of the fourth term
    
    b4 - second factor of the fourth term
    
    Returns:
    
    a₁×b₁ + a₂×b₂ + a₃×b₃ + a₄×b₄
    
    See Also:
    
    CalculusFieldElement.linearCombination(Object, Object, Object, Object), CalculusFieldElement.linearCombination(Object, Object, Object, Object, Object, Object)
  - linearCombination
```
public Dfp linearCombination(double a1,
                             Dfp b1,
                             double a2,
                             Dfp b2,
                             double a3,
                             Dfp b3,
                             double a4,
                             Dfp b4)
```
    Compute a linear combination.
    
    Specified by:
    
    linearCombination in interface CalculusFieldElement<Dfp>
    
    Parameters:
    
    a1 - first factor of the first term
    
    b1 - second factor of the first term
    
    a2 - first factor of the second term
    
    b2 - second factor of the second term
    
    a3 - first factor of the third term
    
    b3 - second factor of the third term
    
    a4 - first factor of the fourth term
    
    b4 - second factor of the fourth term
    
    Returns:
    
    a₁×b₁ + a₂×b₂ + a₃×b₃ + a₄×b₄
    
    See Also:
    
    CalculusFieldElement.linearCombination(double, Object, double, Object), CalculusFieldElement.linearCombination(double, Object, double, Object, double, Object)

Class Dfp

Field Summary

Fields inherited from interface org.hipparchus.CalculusFieldElement

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Methods inherited from interface org.hipparchus.RealFieldElement

Methods inherited from interface org.hipparchus.CalculusFieldElement

Field Detail

RADIX

MIN_EXP

MAX_EXP

ERR_SCALE

FINITE

INFINITE

SNAN

QNAN

mant

sign

exp

nans

Constructor Detail

Dfp

Dfp

Dfp

Dfp

Dfp

Dfp

Dfp

Dfp

Method Detail

newInstance

newInstance

newInstance

newInstance

newInstance

newInstance

newInstance

newInstance

newInstance

getField

getRadixDigits

getZero

getOne

getTwo

shiftLeft

shiftRight

align

lessThan

greaterThan

negativeOrNull

strictlyNegative

positiveOrNull

strictlyPositive

abs

isInfinite

isNaN

isZero

equals

hashCode

unequal

rint

floor

ceil

remainder

trunc

intValue

log10K

power10K

intLog10

power10

complement

add

negate

subtract

round

multiply

multiply

divide

divide